Self Levelling Screed & Smoothing Compound
Choosing the correct self levelling screed and smoothing compound ensures a flat and level subfloor that is essential for the perfect flooring installation. Ardex is an award winning manufacturer with a range of screed and self levelling compounds to suit all needs from water based to latex. Ardex have created rapid setting and quick drying […]
Choosing the correct self levelling screed and smoothing compound ensures a flat and level subfloor that is essential for the perfect flooring installation. Ardex is an award winning manufacturer with a range of screed and self levelling compounds to suit all needs from water based to latex. Ardex have created rapid setting and quick drying properties which means you can walk on it in as little as 30 mins ensuring quick turnarounds.
Let's take a look at 3 of our best sellers, ARDITEX NA, Arditex CL and the new Arditex CL Plus
ARDITEX NA
ARDITEX NA the self levelling latex smoothing compound provides the ultimate solution for problem floors. ARDITEX NA has excellent adhesion to almost all substrates without the need for primer, including flooring grade (SP101) plywood, ceramic tiles, steel and old bitumen adhesive residue.
- Install floorcoverings after 4 hours and ceramic tiles after 3 hours
- Apply from feather edge to 12mm neat, and up to 30mm incorporating ARDEX Coarse Aggregate
- Walk on after 2 hours
- Convenient bag and bottle mix with no measuring or water required
- Advanced performance, even at lower temperatures
- Suitable for use with underfloor heating
Unit Size Available: 20kg Powder & 4.95kg Latex
Coverage: Approximately 5m² at 3mm thick per unit.
ARDITEX CL
If you are looking for a smoothing levelling compound for a new build, then look no further than the Arditex CL. This screed gives the perfect floor with no trowel marks, ridges, joints etc.
- Apply most floorcoverings after 12 hours
- Receives light foot traffic in as little as 2 hours
- Excellent flow and application properties
- Can be used on heated screeds
- Unit Size Available: 20kg Powder & 4.5kg Latex
- Coverage: Approximately 4m2 at 3mm thick per unit.
Arditex CL PLUS
- ARDITEX CL PLUS+ is a two part levelling and smoothing compound with excellent flow and application properties. It’s moisture tolerant and suitable for use under a DPM. For levelling and smoothing internal subfloors such as concrete, cement/sand screeds, bitumen, adhesive residues and ceramic tiles. ARDITEX CL PLUS+ is fibre reinforced for extra strength and flexibility.
- Apply direct to most substrates without priming, including old adhesive residues and bitumen, ARDEX Damp Proof Membranes and ceramic tilesUnaffected by moisture and can be used direct to damp concrete
- Walk on after 2 hours and install floorcoverings in as little as 8 hours
- Can be used on heated screeds
- Coverage: Approximately 4m2 at 3mm thick per unit.
Check out the video from Ardex comparing the ARDITEX NA and Arditex CL https://youtu.be/eJSQEJCWJbg?si=dFzKPL0Rs1qzaspC
Information and images from ARDEX https://ardex.co.uk/products/self-levelling-compound/
Top Rated
