While vinyl flooring is a highly durable substance, the fact of the matter is that it can become damaged over time; particularly in areas associated with a high level of foot traffic.
This is why it pays to know how to create a patch when addressing any imperfections. Let us take a look at a few simple steps which will come in handy along the way.
Cutting the Initial Patch
You will first need to find an excess piece of
sheet vinyl flooring. Place it over the top of the damaged section. Cut the new piece so that it is at least four inches wider and longer.
Placing the Patch Over the Damaged Area
You will then place the patch over the damaged area (ensuring that the patterns align if relevant). Set the new piece in place with a few sections of tape.
Using a standard utility knife, cut through
both the new section as well as the periphery of the damaged underlying area. Remove the new piece and pry up the damaged section using a putty knife.
Adhering the New Piece
Be sure to remove any loose dirt and debris before applying vinyl adhesive and pressing the new section firmly into place. A bead of sealant may also be required around the periphery in order to ensure a strong bond.
Please note that specific materials such as
Altro flooring may recommend that a certain type of adhesive is used, so always be sure to read the instructions before carrying out such a project.
We can see that replacing a section of damaged flooring is actually much easier than it may initially appear. Please feel free to contact a professional at Flooring Supplies Direct in order to obtain even more how-to advice.
